Trailer wheels need special care as they are subjected to heavy loads and intermittent use. Installing new wheels on your trailer is a relatively simple process. It’s not much different than changing the wheels of a vehicle. A few simple tips can make selecting and installing new trailer wheels easier.

Consider buying and installing a new set of wheels when you need to replace tyres. The price of wheel-tyre packages is comparable to that of tyres, and you don’t have to balance or mount the tyre to an old wheel. You can also save an old wheel with its tyre to use as a spare. Most trailers don’t come with spare tyres. For Trailer Parts, visit https://autoandtrailer.com/shop/trailer-parts

Before you begin the installation, use a tyre wrench or lug-wrench to loosen the lug nuts on the wheel. As you tighten the lug nuts, the friction between the wheel and the ground will prevent it from rotating. Then, raise your trailer. If the ground is soft or uneven, place a piece of plywood underneath your jack.

Take a minute to check your wheel hub when you remove your wheel. It might be time to repack your bearings if you haven’t done so before, especially if the trailer gets wet. Check your brake pads if your trailer has them.

After you’ve mastered the basic steps, changing a trailer rim is incredibly easy. The second wheel in a pair is usually done in half the time as the first. It’s always better to replace all your wheels at once than in pieces, so that your trailer tyres are all wearing equally.